[Nagiosplug-devel] MRTG Graf
Devinder Singh
devinbhullar at gmail.com
Mon May 12 07:55:43 CEST 2008
Hello
I managed to run the mrtg.log file but i still can tview the Graphs
Nagios says the data is outdated.
MRTG data has expired (20176157 minutes old)
I have a crontab -e command line as :
#AVGSCAN-GUI
0 8 * * 5 (FILENAME=/root/.avg7/testresults/testreport.`date +\%s`;
/opt/grisoft/avg7/bin/avgscan -report $FILENAME /|| mv $FILENAME
$FILENAME.)
*/5 * * * * /usr/bin/mrtg /home/mrtg/cfg/mrtg1.cfg --logging
/var/log/mrtg1.log
~
this is a potion of mrtg1.log
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
WorkDir: /home/mrtg
Options[_]: bits,growright
######################################################################
# System: SilterraKL.yourdomain.com
# Description: Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version
12.4(3i), RELEASE SOFTWARE (fc2)
# Technical Support: http://www.cisco.com/techsupport
# Copyright (c) 1986-2007 by Cisco Systems, Inc.
# Compiled Wed 28-Nov-07 21:09 by stshen
# Contact:
# Location:
######################################################################
### Interface 1 >> Descr: 'FastEthernet0/0' | Name: 'Fa0/0' | Ip: '
210.19.228.81' | Eth: '30-78-30-30-31-65-66-37-36-30-36-38-35-38' ###
Target[210.19.228.81_1]: 1:public at 210.19.228.81 <1%3Apublic at 210.19.228.81>:
SetEnv[210.19.228.81_1]: MRTG_INT_IP="210.19.228.81"
MRTG_INT_DESCR="FastEthernet0/0"
MaxBytes[210.19.228.81_1]: 12500000
Title[210.19.228.81_1]: Traffic Analysis for 1 -- SilterraKL.yourdomain.com
PageTop[210.19.228.81_1]: <h1>Traffic Analysis for 1 --
SilterraKL.yourdomain.com</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>SilterraKL.yourdomain.com in
</td>
</tr>
<tr>
<td>Maintainer:</td>
<td></td>
</tr>
<tr>
<td>Description:</td>
<td>FastEthernet0/0
$ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0/0$ </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>Fa0/0</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>100.0 Mbits/s</td>
</tr>
What am i missing from here. I need to view bandwidth stats on the Router.
Ragards,
Devinder
2008/4/30 Devinder Singh <devinbhullar at gmail.com>:
>
> Hi
>
> I have problems in getting bandwidth statistics using MRTG.
>
> define service{
> use generic-service ; Inherit values from
> a template
> host_name D-Link
> service_description Port 1 Bandwidth Usage
> check_command
> check_local_mrtgtraf!/home/mrtg/cfg/mrtg.cfg!AVG!1000000,1000000!5000000,5000000!10
> }
>
> I tried to run the above command and see the file is outdated.
>
> i have ran the cfgmaker program and stored the mrtg.cfg in
> /home/mrtg/cfg/mrtg.cfg
>
> Please advise
>
> --
> Devinder
--
Devinder
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://nagios-plugins.org/archive/devel/attachments/20080512/59b6b07d/attachment.html>
More information about the Devel
mailing list