[Nagiosplug-devel] Installation of NRPE and Plugins on IBM AIX
David Peer
david.peer at gmail.com
Sun Jan 16 20:01:37 CET 2005
Hi
compile the nrpe plugin with the disable-ssl option and from the
linux server run all your checks with the -n option:
check_nrpe -H <your_R_host> -n
BR
BTW how did you managed to compile the plugins on AIX?
I fail very time.
Thanks
...[write your message here]...
- David Peer (davidp)
-----------------------
This thread is located in the archive at this URL:
http://www.nagiosexchange.org/nagiosplug-devel.31.0.html?&tx_maillisttofa
q_pi1[showUid]=624
> Hi Ton,
>
> Thanks for your immediate response!!!
>
> As per you I have downloaded the "nagios-plugins-1.4.0-alpha3"
and
> "nrpe-2.0" from the nagios site and installed it on the IBM AIX
5.2.0.0
> server. The compilation was successful.
>
> After the compilation I verified that nrpe daemon is running and
the
> port is active on the AIX server.
>
> I tried to run the "check_nrpe" from the Linux server which is
our
> Nagios server. The following was the result.
>
> -----------------------------------------------------------------------
-
> -----------------------------------------------------------------------
> [root at NagiosServer libexec]# ./check_nrpe -H AIXSERVER -c check_users
>
> CHECK_NRPE: Received 0 bytes from daemon. Check the remote server
logs
> for error messages.
> -------------------------------------------------------------------
>
> I checked the syslog in AIX SERVER.
> -----------------------------------------------------------------------
-
> ------------------------------------
> aixserver: /var/log>grep nrpe syslog
>
> Dec 22 13:21:58 ukcsqply nrpe[17228]: connect from nagiosserver
> Dec 22 13:22:11 ukcsqply nrpe[17230]: connect from nagiosserver
> -----------------------------------------------------------------------
-
> ----------------------------------------
> I found that the nrpe daemon running on the AIX server is not
sending
> the results to the check_nrpe request from Nagios server.
>
> The entry for nrpe in inetd.conf is as follows.
> -----------------------------------------------------------------------
-
> --------------------------------------------------------
> aixserver: /etc>grep nrpe inetd.conf
>
> nrpe stream tcp nowait nagios /usr/local/bin/tcpd
> /usr/local/nagios/nrpe -c /usr/local/nagios/nrpe.cfg --inetd
> -----------------------------------------------------------------------
-
> ----------------------------------------------------------
>
> Please suggest the solution for this problem. I would be glad
to provide
> you with more details if you need.
>
> Thanks and Regards,
> Subash Rajan.
>
>
>
>
>
> -----Original Message-----
> From: Ton Voon [mailto:tonvoon at mac.com]
> Sent: Monday, December 20, 2004 9:49 PM
> To: Subash Rajan (WT01 - MANUFACTURING)
> Cc: SureshKumar Ramaswamy (WT01 - TECHNOLOGY INFRASTRUCTURE SERVICES
> (GS)); nagiosplug-devel at lists.sourceforge.net; SunilShriram Borkhedkar
> (WT01 - MANUFACTURING)
> Subject: Re: [Nagiosplug-devel] Installation of NRPE and Plugins
on IBM
> AIX
>
>
>
> Subash,
>
> We are not maintaining release 1.3.1 much any more. Please try
> the 1.4alpha2 release - there have been reports of successful
compiles
> on AIX.
>
> Ton
>
> On 17 Dec 2004, at 04:27, subash.rajan at wipro.com wrote:
>
>
> Hi,
> With related to the above subject I have few queries for
> which I need your suggestions.
> We are using Nagios Verion 1.2 for Monitoring servers
> running Windows NT, Windows 2003 and Linux Operating Systems.
> Additionally we are monitoring network devices which are
> Wireless Access Points and Switches.
> We would like to include few Unix Servers running IBM
> AIX for monitoring.
> The Maintenance Level of the AIX OS is 5.2.0.0.
> We have downloaded the nrpe-2.0 and Nagios-Plugins-1.3.1
> from Nagios site and installed on the AIX system.
> We could successfully install and compile NRPE, started
> the daemon and verified that nagios server is able to communicate
to the
> port 5666 of the AIX server.
> But we have problem in installing and compiling
> Nagios-Plugins. I have attached the error output while compiling
> plugins.
> The files attached are the outputs for the commands
> './configure' 'make all' and 'make install' from the directory
> /usr/local/nagios/nagios-plugins-1.3.1/plugins.
> Requesting you to investigate the problem and provide
> your feedback.
> Awaiting yout response,
> Thanks and Regards,
> Subash Rajan.
> Wipro Technologies.
> Bangalore.
>
> <Plugins-configure.txt><Plugins-makeall.txt><Plugins-makeinstall.txt>
More information about the Devel
mailing list